Free UK Delivery Over £100
Next Working Day Delivery
Expert Advice & Support
Competitive Pricing

Flag Asipo Algicidal Treatment

Flag Asipo Algicidal Treatment

(1 customer review)

£13.95£41.49

Description

A clear single pack water-borne algicidal wash. For use as a surface biocide. A very effective
biocide to protect against mould, lichens and algae. Long term protection against re-growth.
Simple to apply. Can be over-coated with most conventional paints. For further protection
overcoat the treated areas with Asipo paints.

Directions for use:
Dilute with 4 parts water to 1 part Asipo Algicidal Treatment.
Apply liberally with a brush, sponge or cloth and wipe off (before allowing it to dry).
Stubborn areas may require a further application or try leaving the treatment to work longer
before wiping off. Clean the treated areas with clean water or a mild cleaning solution.
For use on a wide variety of external building substrates. Suitable for use as an algicidal wash
on patios, external paving, roof tiles/substrates, decking, brick & block work.

Additional information

Brand

Colour

Clear

1 review for Flag Asipo Algicidal Treatment

  1. Joe

    I used this on my roof before using the roofix I purchased from here and it was really great stuff! Would definitely recommend

Add a review

Your email address will not be published. Required fields are marked *

Data Sheet

Area of use:
Internal and External

Substrates:
Concrete, render, brick, general masonry and roofing substrates, including internal wall and
ceiling tiles.

Packing:
5 Litre

Physical Constants:
Colour: Clear
Finish: N/A
Volume solids: N/A
Theoretical spreading rate: Up to 10 sq. metres per litre (dependant on porosity)
Flash point: N/A
Specific gravity: 1.0 – 1.02
Dry to touch: 2 hours (20°C)
Over-coating time: 6 hours

*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor. The physical constants are subject to normal
manufacturing tolerances.

Application Details:
Application method: Brush / Sponge / Cloth / Spray
Thinner: Dilute with water as instructed
Cleaning of tools: Water

Surface condition
The surface should be stable, firm, dry and free of dust, sand,
loose old paint, dirt, grease and oil.
Please refer to the Material Safety Data Sheet for further information.
For additional guidance please contact us here

Related Products

£8.95£26.95

Speak with our Experts

Whether you need expert advice on surface preparation techniques, or application tips, our team is always here to help!

Filters