Data Sheet

Sealing / Priming
It is only necessary to seal a porous substrate such as new or bare concrete. A sealer coat is
achieved by adding 10% white spirit to the paint. Please note new concrete floors can only
be painted after 6-8 weeks.

Area of use
Interior and exterior (not suitable for all exterior applications)

Substrates
Concrete, stone and wooden floors

Packing
5 litre and 20 litres (supplied as 4 x 5L tins)
20 litre drums (min order for drums is 12 x 20L)

Physical Constants
Colours: Red-04039, Green 14C39, Grey 00A05, Mid Grey 00A09, Blue
20D45 and Black
Finish: Semi gloss
Volume solids: 50%
Theoretical spreading rate: 12 – 15 sq. metres per litre (depending on surface)
Flash point: 38°C
Specific gravity: 1.4
Dry to touch: 2 – 4 hours (20°C)
Over-coating time: 16 hours (do not exceed 5 days for over-coating)

*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor. The physical constants are subject to normal
manufacturing tolerances.

Application Details
Application method: Brush or roller
Thinner: White Spirit
Cleaning of tools: White Spirit

Surface condition

The surface should be stable, firm, dry and free of dust, sand,
loose old paint, dirt, grease and oil.
For additional guidance (eg. power-floated floors, existing coatings, possible existing
contamination etc.) please contact us here. Please
check colour before use. If using multiple cans please check batch numbers are the same