£13.95 – £41.49
A clear single pack water-borne algicidal wash. For use as a surface biocide. A very effective
biocide to protect against mould, lichens and algae. Long term protection against re-growth.
Simple to apply. Can be over-coated with most conventional paints. For further protection
overcoat the treated areas with Asipo paints.
Directions for use:
Dilute with 4 parts water to 1 part Asipo Algicidal Treatment.
Apply liberally with a brush, sponge or cloth and wipe off (before allowing it to dry).
Stubborn areas may require a further application or try leaving the treatment to work longer
before wiping off. Clean the treated areas with clean water or a mild cleaning solution.
For use on a wide variety of external building substrates. Suitable for use as an algicidal wash
on patios, external paving, roof tiles/substrates, decking, brick & block work.
| Brand | |
|---|---|
| Colour | Clear |
Area of use
Interior and Exterior
Substrates
Ferrous Metals
Packing
250ml stock item
1 litre, 2.5 litres and 5 litres (min batch 200L)
Physical Constants
Colour: Black
Finish: Satin
Volume solids: 42%
Theoretical spreading rate: 2-3 sq. metres per 250 ml
Flash point: N/A
Specific gravity: 1.20
Dry to touch: 30 mins
Over-coating time: 4-6 hours
*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor. The physical constants are subject to normal
manufacturing tolerances.
Application Details
Application method: Brush, Spray*
*Minimum DFT 75µm, adjust accordingly for rough surfaces.
Thinner: Water
Cleaning of tools: Water
Surface Condition Ensure surface is free from all flaking material, dust, dirt, oil and
grease. Metals (especially new/forged items) may require
degreasing. Do not apply in temperatures below 10 degree
centigrade.
Please refer to the Material Safety Data Sheet for further information.
Please check colour before use. If using multiple cans please check batch numbers are the
same. For additional guidance please contact us here
Whether you need expert advice on surface preparation techniques, or application tips, our team is always here to help!
Your ultimate destination for all your painting and finishing needs.
© 2024 All Rights Reserved.
Joe –
I used this on my roof before using the roofix I purchased from here and it was really great stuff! Would definitely recommend