£34.96
High build quick air-drying oxide primer for use on ferrous metals, provides good protection
prior to over coating with most solvent based finishing products. Suitable for a wide variety of
applications where speed and ease of application are required. Compatible with FLAG
Hammer Finish and FLAG Smooth Metal paints.
Area of use:
Internal/External Industrial Structural Steel
Substrates:
Metal
Packing:
1 Litre & 2.5 Litre
Physical Constants:
Colour: Red & Grey
Finish: Matt
Volume solids: 60%
Theoretical spreading rate: 12 – 15 sq.metres per litre
Flash point: 23ºC
Specific gravity: 1.45 – 1.50
Dry to touch: 15 minutes
Over-coating time: 4 hours
*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the
substrate, and the relevant consumption factor. The physical constants are subject to normal
manufacturing tolerances.
Application Details:
Application method: Brush Conventional spray Airless spray
Thinner: Xylene (T10009)
Cleaning of tools: Xylene (T10009)
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
Please refer to the Material Safety Data Sheet for further information.
For additional guidance please contact us here
Whether you need expert advice on surface preparation techniques, or application tips, our team is always here to help!
Your ultimate destination for all your painting and finishing needs.
© 2024 All Rights Reserved.
Reviews
There are no reviews yet.